Turbidity Analyser (A-F330)

• Customization: Available
• Accuracy: ±1.0%Fs
• Range: Silica, 0~100 G/L
• Model NO.: A-F330
• Power: <=15 W
• Transport Package: Carton
• Specification: ISO
• Origin: China
• Production Capacity: 100 Sets

Product Description

Turbidity analyser
Multi-beam of RD measurement technology to compensate for the impace of ambient light, dirt and component aging.
Multi-point calibration to ensure accuracy within the measuring range.
A variety of variables output, intelligent control systems such as current and relays.
The sensor can be configured to air purge device, controlled by the transmitter to self-clean.
A variety of installation methods such as immersion, pipe plug-in etc...
Water treatment plant: Sedimentation tanks
Paper mill: Pulp concentration
Coal washing plant: Sedimentation tanks
Electricity: Mortar sedimentation tanks etc.
Sewage treatment plant: Inlet and outlet, aeration tanks, return sludge, primary sedimentation tank, secondary sedimentation tank, concentration tank, sludge dewatering etc.

Item	Turbidity Analser
Transmitter	Technical Parameters: Measuring Range: Activated sludge, 0 ~30g/L  Silica, 0~100 g/L Display: LCD Units of Measurement: g/L and mg/L(Optional) Resolution: 0.01% Accuracy: +-1.0%FS Repeatability: +-1.0% Power: < =15 W Analog Output: 4~20mA, load 750Ω Switch Output: 2 relays, capacity 220VAC/2A Power Supply: AC220V+-10%
Sensor	Sensor Material: 316stainless steel Cable: shielded cable Installation: Immersion, pipe plug-in Process Connection: ZG1 Dimensions: Φ 50*96mm Medium Pressure: < =3 bar Signal Cable: 10M(standard configuration)Can be extended Degree of Protection: IP68 Operating Temperature: Sensor: -20~60C