Gas Turbine Flow Meter

• Customization: Available
• Accuracy: ±0.2-0.5%
• Main Application: Water, Wastewater, Diesel Fuel, Fuel Oil, Nature Gas
• Model NO.: LWQ
• Sensor: Tube/Flange
• Type: Turbine Flow Meter
• Measuring Media: Gas
• Measuring Principle: Electrical Principles
• Certification: DIN, GB, CE, ISO
• Measure Size: Dn4 to Dn200 Mm
• Temperature: -20~120 Degr C
• Power Supply: 24vdc or Battery
• Transport Package: Carton
• Specification: ISO9001
• Trademark: BEIF
• Origin: China
• Production Capacity: 300 Sets/Month

Product Description

Turbine flowmeter
Temperature: -20C~120C
Output: 4~20mA, Pulse(Standard), RS485/RS232
Accuracy: +/-0.5% of full scale
Low cost, High performance
Measure liquid or gas

Turbine flowmeter						Description
Type	A					Flow  sensor  pulse  output  three-wire  system,   +12V  power  supply;
	B					Local  display,   powered  by  3.6V  battery;
	C					Local  display  with   4~20mA  or  pulse   output,   powered  by  24V;
	D					Flow  transmitter  4~20mA  output,   powered  by  , 24V;
Nominal  drift  diameter Note: standard flow as user manal		4				Normal  flow  range m3/h	0.04~0.25	Extended  flow  range m3/h	0.04~0.4
		6					0.1~0.6		0.06~0.6
		10					0.2~1.2		0.15~1.5
		15					0.6~6		0.4~8
		20					0.8~8		0.45~9
		25					1~10		0.5~10
		32					1.5~15		0.75~15
		40					2~20		1~20
		50					4~40		2~40
		65					7~70		3.5~70
		80					10~100		5~100
		100					20~200		10~200
		125					25~250		12.5~250
		150					30~300		15~300
		200					80~800		40~800
Explosion  protection						Not  marked,   without  explosion  protection
			B			Explosion  protection  type
Precision  class				A		Precision:   Class  0.5
				B		Precision:   Class  1.0
Turbine  type					A	Normal  flow  range
					B	Extended  flow  range
Note: Sensors  with  pipe  diameter  of  DN4~DN40  are  of  thread  connections  with  maximum  operating  pressure  of  6.3Mpa. Sensors  with  pipe  diameter  of  DN50~DN200  are  of  flange  connections  with  maximum  operating  pressure  of  2.5Mpa. Sensors  with  pipe  diameter  of  DN4~DN10  are  provided  with  front  and  rear  straight  pipe  sections  and  filters.     Please  specify  when  placing  an  order  if  flange  connections  are  required  for  pipe  diameter  of  DN15~DN40. Please  specify  when  placing  an  order  for  high  pressure  type  and  special  requirements.